Installation manual for BMW X6 E71 Front bumper flaps
2) Do a test fit of the flap and drill holes – we do not predrill holes because all front bumpers are deformed !! Once holes are drilled – do a test fit and you will see that inner side of the flap won’t line up to the bumper without pressur
3) Apply adhesive on a inner side of the flap and fasten it so adhesive can curdle ( DO NOT USE SEALANTS OR 3M TAPE )
Sport Arches installation manual on Е70 Х5
Arches/flares for BMW X5 E70 2006-2014
For installation you will need:
1) Hands ( two hands and a clean mind )
2) Rivets and a gun for it
3) Electronic drill to drill correct holes for rivets
1) Remove existing arches, you will destroy 99% of existing rivets, remove the parts of the rivets from the splash guards
2) Do a test fit to find out where to drill the holes for rivets on the new arches
3) Clip in arches, don’t be afraid to apply pressure and force ( stretch the arches – material is elastic enough ). Push the arch inside desired places and fasten it with rivets
Installation manual for Bodykit 4.6is – BMW X5 E53 1998-2003 ( before facelift ) Bodykit can be found here For installation you will need: 1) Hands 2) Adhesive/glue and a gun 3) Metallic rivets and a gun for it 4) Paper scotch tape 5) Electronic drill to drill correct holes for rivets Front lip installation process Required : 2) 4)…